A repository of 3D print STL sources

[davehicks]

Someone told me last week they had seen a little dock that fits onto a Backscatter OS-1 Snoot to hold the aperture card when it isn't being used. Anybody seen the stl file for that?

What's wrong with the string? But I nearly always leave mine in place. Removing it does not create a larger aperture.

That said, I could make a dock or clip that would parallel the barrel with little effort if there is interest.

 

[rob.mwpropane]

Can anyone here print nylon? I have a stock ender 3 but it needs a few things to print that high and I really only need to print a few parts.

PM me, thanks!

 

[evandroairton]

Hi there
Does anyone has a source file for the attached U.S. Divers second stage Screw?
If someone has the equivalent to Mares 1990's plastic second satges (Nikos, Akros, Etc) would be apreciated too

Regards

Evandro




Regards

 

[emoreira]

Hi there
Does anyone has a source file for the attached U.S. Divers second stage Screw?
If someone has the equivalent to Mares 1990's plastic second satges (Nikos, Akros, Etc) would be apreciated too

Regards

Evandro




RegardsView attachment 881529View attachment 881530

I guess this is what you need.

 

[evandroairton]

I guess this is what you need.
View attachment 881572

Tanks a lot
s

 

[The Chairman]

Tanks a lot
s

We need a "Groan" like.

 

[TMurrr]

Anyone have a spanner tool for the atomic TFX? @James79 maybe?

I'm also happy to send measurements if it would be easy to design one.

 

[James79]

Anyone have a spanner tool for the atomic TFX? @James79 maybe?

I'm also happy to send measurements if it would be easy to design one.

I'll post them up to thingiverse tonight

 

[James79]

TFX 3 pin spanner, double blade adjuster, and 1st cut at replacement top cap and spring caps.

Atomic TFX tools/parts by James1979

Pin spanner takes 1.6 mm steel rod pieces pressed in with a vice for the pins. Adjustment tool uses sheet steel cut to size and pressed in for the 2 "blades". Replacement Cap and Spring cap are untested.

www.thingiverse.com

@TMurrr

 

[TMurrr]

TFX 3 pin spanner, double blade adjuster, and 1st cut at replacement top cap and spring caps.

Atomic TFX tools/parts by James1979

Pin spanner takes 1.6 mm steel rod pieces pressed in with a vice for the pins. Adjustment tool uses sheet steel cut to size and pressed in for the 2 "blades". Replacement Cap and Spring cap are untested.

www.thingiverse.com

@TMurrr

Wow thank you very much!