Hi there,
I have a UK-Germany (Unterwasserfototeknik not underwater kinetics) housing for an old canon EOS. The cable that connnects it to my strobe is bust and I need a new one. Does anyone know where I could buy one? I had to get one a few years ago and after much searching Reefphoto.com...
Really good photos, I especially like how you've got the blue of the sea in the background. My only possible suggestion would be to get a bit closer to your subjects, not an easy challenge!
why not rent a weightbelt and spare weights from your LDS. Spend an hour or so playing with different configurations, positions and amounts. Then buy what you need.
One of the ports on the Mares Abyss is designated for the primary second stage. This has a wider orifice than a standard port. To use your new 7ft hose in this port you will need an adaptor. You could also go to a hose specialist and get them to cinch a new fitting to the hose. you willnot be...
If you can get that far, I really reccommend Scubadive west (www.scubadivewest.com). It's in the far west of Ireland, great diving, at its warmest in September. The island safaris that they run go to some of the best sites around. Their pet wreck is a bit tame though.
Hi Peggy,
That sounds awful. I really don't know what caused the leaks, however it is possible that there may have been too much grease on the o-rings. You should only put a thin sheen of silicon on the orings, if there are large blobs they can attract dirt and/or let water in. If you needed to...
try any of the kowalski range. I have the maxum 620, brilliant torch. they have a dimmer switch so you can turn the light up and down. you don't need to open them to charge.
I would reccomend M.V. Invincible. Spent 5 dive days diving the wrecks with them. Very good skipper knows the wrecks well. It's a comfy liveaboard so no problems with accomodation.
You don't need to use any glue. If you can, carefully seperate the main body of the mask from the front frame. There might be some little pins, be careful to not break them. Then when the mask is in 3 bits clean them all, place the silicone skirt into the mask and then snap the front cover back...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.