Benchtop Vise Recomendations- split out from Regulator Service Technician Training - Unrestricted

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Yours looks the same, even the name. Except I paid 4 times as much. Ugh

Edit: 250 USA, all others Taiwan.
250 and 2503 (replaceable jaw version of 250) are both now made in Taiwan. COV-3 is China (PRC).

Taiwan had really moved up in terms of manufacturing quality in the last couple of decades. I'd be happy with just about anything made there. It's been interesting watching "Made in Japan", "Made in Korea", and then "Made in Taiwan" go from being jokes to marks of quality.
 
upload_2021-5-25_17-6-37.jpeg
 
250 and 2503 (replaceable jaw version of 250) are both now made in Taiwan. COV-3 is China (PRC).

Taiwan had really moved up in terms of manufacturing quality in the last couple of decades. I'd be happy with just about anything made there. It's been interesting watching "Made in Japan", "Made in Korea", and then "Made in Taiwan" go from being jokes to marks of quality.
Returning mine, I’d rather have a Panavise in this small table top size.
 
My finger is going to get very tired reporting you guys.
 
My finger is going to get very tired reporting you guys.
You only have to do it once. If/when the mod decides to split these off, it's just a matter of ticking a check box next to all the posts that need to be split and pushing the split button.

But I'll desist from further vise comments except to say that Yost quit making vises in the US in 2016. Maybe they haven't gotten around to updating that web page. If you follow the link to the individual product page, it says it's made in Taiwan.

250, 2-1/2
 
You only have to do it once. If/when the mod decides to split these off, it's just a matter of ticking a check box next to all the posts that need to be split and pushing the split button.

But I'll desist from further vise comments except to say that Yost quit making vises in the US in 2016. Maybe they haven't gotten around to updating that web page. If you follow the link to the individual product page, it says it's made in Taiwan.

250, 2-1/2
I’ll let Amazon know. Thanks
 
TBH, a vacuum base won't give you enough "grab" for anything but holding parts. When you need to torque a turret or balance chamber (modest torque, whether you choose to measure it or not), it may hold, depending upon the axis of force relative to the base. When you need to torque your yoke or DIN bolt (20-25 foot-pounds!), there is no way a vacuum base will hold.

The discussions above also touched on clamp vises that mount to a table edge. As you'll read, there were challenges.
It's a key tool for servicing, and so $35 is about minimum cost. This sort of thing:
Amazon.com: IRWIN Tools Record Light Duty Workshop Vise, 4.5-Inch (4935507): Home Improvement

Easy solution: take your cheap vise and permanently bolt it to a 1' x 2' scrap of 3/4" plywood. Then get some padded furniture clamps and temporarily attach that to your work surface.
https://www.homedepot.com/p/DEWALT-Medium-and-Large-Trigger-Clamp-4-Pack-DWHT83196/205086878 (but you don't need four of them, lol).
Or regular C-clamps and some shims to protect your table.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom