Scubapro Mk10 - low intermediate pressure

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Fantastic, so, all the Gen2 parts were used...except the metal air barrel?

Then, you also swapped out the diaphragm cover to the new ones? But otherwise, all the Gen 2 parts fit...with only the air barrel swapped in?

How much was the new air barrel?

Thank you so much for posting these pics!!
 
Fantastic, so, all the Gen2 parts were used...except the metal air barrel?

Then, you also swapped out the diaphragm cover to the new ones? But otherwise, all the Gen 2 parts fit...with only the air barrel swapped in?

How much was the new air barrel?

Thank you so much for posting these pics!!

I used the kit (45.602.020) consisting of part #'s
01.006.022 Decal
11.602.022 Metal barrel
11.602.013 Guide Sleeve
11.500.024 Sleeve

Then upgraded the cover to the round gen 4.
I want to say it was about $55 for the kit and cant recall it requiring any other parts.
 
I used the kit which consists of part #'s
01-006022 Decal
11-602022 Metal barrel
11-602-013 Guide Sleeve
11-500-024 Sleeve

Then upgraded the cover to the round gen 4.
I want to say it was about $55 for the kit and cant recall it requiring any other parts.

That is awesome!! I am hoping to get both my regs to Gen 2 [one is Gen 1 that is getting a Gen 2 knob]....and will see if I can get these parts.

You are awesome, Mr Sunday!!
 
I have some kits to convert G-250HPs and G-500s to a metal air barrel and my lazy ass hasn’t tried them yet. I need to convert a couple.

That G250HP with the metal air barrel is basically an S600 with a bigger diaphragm, no? :)

I used the kit which consists of part #'s
01-006022 Decal
11-602022 Metal barrel
11-602-013 Guide Sleeve
11-500-024 Sleeve

Then upgraded the cover to the round gen 4.
I want to say it was about $55 for the kit and cant recall it requiring any other parts.

To be sure, the Gen 4 cover is not necessary, right?
 
Here's a new wrinkle! Slightly off topic, but at least it's re:Mk10.
Was restoring an old Mk10 with my son and everything seemed perfect until the submerged test. Tiny HP leak from the center hole of the seat carrier.
Switched the D90 2-013 (subst. 01.050.147) for a D90 3-905 and it sealed right up!

Maybe put a note on your annotated Mk10 schematic as an alternative.
 
I used the kit (45.602.020) consisting of part #'s
01.006.022 Decal
11.602.022 Metal barrel
11.602.013 Guide Sleeve
11.500.024 Sleeve

Then upgraded the cover to the round gen 4.
I want to say it was about $55 for the kit and cant recall it requiring any other parts.

That's cheap, was that kit purchased before this year? Cheers.
 

Back
Top Bottom