Sherwood Avid BC Tank Strap Brackets Failed

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

No link showing.
Yeah I seem to work my dive computers better than personal computers. Can you school me on how to link post from another thread?
 
Avid BC / Broken strap holder (lower)
 
I found a generic stainless backplane on Amazon for less than $35. I get it tomorrow. I will let you know how it works out.

https://www.amazon.com/dp/B00LOZIAFM/ref=cm_sw_em_r_mt_dp_U_XR0PDb7RSEWVW




Anyone else experienced BOTH of their Avid bc tank strap 'brackets' (hard plastic composition material) making a clean and sudden break from the back of vest? Both of mine broke this weekend as I was entering water for a shore dive. Tank swung to side pulling 2nd stage from my mouth. I was on surface thankfully but the strap breaks are a serious issue. Looks as though the material failed. I only have 178 dives on this bc. I believe its a 2012 or thereabouts model.
 
Fixed my avid using 0.85 cent sheet of aluminum, cut out oval holes to match straps and then sliced the bc backplate to match and placed aluminum backplate up against bc backplate and threaded straps through holes. Works like a charm.
 

Attachments

  • IMG_20220420_145952.jpg
    IMG_20220420_145952.jpg
    105.1 KB · Views: 108
Fixed my avid using 0.85 cent sheet of aluminum, cut out oval holes to match straps and then sliced the bc backplate to match and placed aluminum backplate up against bc backplate and threaded straps through holes. Works like a charm.
Definitely better than the original. Why didn't Sherwood think of that instead of denying the problem existed?
 
Fixed my avid using 0.85 cent sheet of aluminum, cut out oval holes to match straps and then sliced the bc backplate to match and placed aluminum backplate up against bc backplate and threaded straps through holes. Works like a charm.
good work and well done.....out of curiosity , how long and how many dives did you have before the problem occurred?
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom