For Sale Any interest in non splined G250 jam nuts?

[davehicks]

Any chance of this rolling again? I would take 10 or so for G250/v and R395 if they fit.

How about a Spline Wrench you can makes as many copies of as you need?

https://makerworld.com/en/models/1285453-scubapro-spline-wrench-open-and-closed-ends#profileId-1314436

 

[Kahuna.]

How about a Spline Wrench you can makes as many copies of as you need?

I have one, it just doesn't clear the nut on non-SP hoses so I use pliers. I would prefer to just be rid of them.

 

[davehicks]

I have one, it just doesn't clear the nut on non-SP hoses so I use pliers. I would prefer to just be rid of them.

That's why I made this one. And it can be printed scaled up by a few % if it doesn't fit.

 

[Kahuna.]

Looks awesome but buying a printer, learning how to use it, testing fit, learning how to scale and then reprinting seems seems harder than nagging @buddhasummer and @Open Ocean Diver into selling their nuts.

 

[davehicks]

Looks awesome but buying a printer, learning how to use it, testing fit, learning how to scale and then reprinting seems seems harder than nagging @buddhasummer and @Open Ocean Diver into selling their nuts.

Lots of public libraries have 3d printers these days. It is quite easy for a downloaded print like this.

 

[tridacna]

Looks awesome but buying a printer, learning how to use it, testing fit, learning how to scale and then reprinting seems seems harder than nagging @buddhasummer and @Open Ocean Diver into selling their nuts.

Cost me $1 to print at my local library. Super simple. I just submitted the .stl file and voila!

 

[Toasterking]

Any chance of this rolling again? I would take 10 or so for G250/v and R395 if they fit.

I would happily go for for at least 2 of the G250s.