Yoke valves on a PST HP120?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

While on the topic of valve inserts, do they all take the same size hex wrench?

Mine appear to be 8mm.

Thanks

Nope, I've got at least 2 different sizes, possibly 3 since one of them I think is 1/4". The other 2 are definetly 6 and 8mm.

Jim
 
The easy (but not cheap) solution is to put 300 bar 7/8"-14 modular valves on the tanks and add 232 bar "H" valves for the yoke regulators.
 
While on the topic of valve inserts, do they all take the same size hex wrench?

Mine appear to be 8mm.

Thanks

Yes, 8mm is the most common size, but as Jimmer says there are others.

I find the chat on yolk and din interesting, personally I dont mind, I use both, but if you intend travelling tank rental options are almost always with yolk valves, so its probably prudent not to use the yolks as fishing sinkers once you have removed them :D
 

Back
Top Bottom