Will this be safe to dive?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I had a house fire a few weeks ago... Lost a lot of my old gear... The only bright side of it is ordering 2 NEW set's of Conshelf XIV supremes ..... But, I'll still have to find the 109's... And I had a right and left hand model... That'll be fun to find...

Jim..

There were left hand 109's ?

I didn't think the body was symmetrical, so it would have to be a special left hand body ??
 
Last edited:
Yes they were a set of 109's that were mirror images ... The one had the hose on the right side and the other had the hose on the left... I used them for side mount diving....

Jim...
 
Last edited:
Looking at the Safety Data Sheet is a bit concerning but I guess most of it is relevant to Brass Black in the liquid state. Any idea how well it holds up in salt water?
Sure, but just wear blue Nitrile disposable gloves and use cotton swab sticks when applying.
So far so good, certainly better than bare brass but haven't had a chance for long term tests in saltwater yet.
 
I sort of like the looks of that. I'll be interested to see the progression.
 
Is there some way to passivate or seal that brass look to stop it all turning to verdigris ?
 
As it is, I too like it but with my OCD I'd need to do the same to the first stage. Am too interested how this turns out. Good luck, take one for the team.
 
Is there some way to passivate or seal that brass look to stop it all turning to verdigris ?
Incralac seems to be the most robust sealant for copper based alloys:

Special Lacquer for Copper, Brass and Bronze Protection Developed by INCRA (International Copper Research Association) expressly for copper-bearing alloys. Most clear coating failures on bronze, brass and copper are due to underfilm staining and tarnishing. INCRALAC contains benzotriazole as a chelating agent to prevent this action. Affords superior resistance to ultraviolet light; excellent resistance to salt air environments. Can be expected to provide at least 5 years protection (normal exterior with 1 ml thick coat). Remove with conventional paint strippers. Air dries to touch and recoat in 30 minutes; complete cure in 48 hours. 13% solids. Incralac covers an approximate surface area of 150 sq. ft/gal. Can be thinned or removed with toluene.
Coating Products
 
That looks nice!
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom