SkimFisher
Contributor
If you buy used your main concern will be with engine condition. Most boat hulls from reputable mfgs (Mako, Everglades, Proline, Grady White, Wellcraft, the list goes on) make a hull that will last FOREVER if it's in the hands of a good owner. Even a layman can look at a boat hull and tell if it's in good shape or not. If you're inexperienced with boats then take someone with you that knows what they're looking at.
Find a good, honest marine mechanic and have him check the boat out for your. Most will do a full head to toe inspection on the hull and engine. Have them do a full diagnostic workup on the engine. Check the plugs, compression, etc. Have them pull the hours of the engine. BOATS and ESPECIALLY MARINE ENGINES ARE EXPENSIVE. Don't assume you're going to sign a note for $15K and never spend another dime on it. Before you buy, get the model/numbers off the engine and do your homework on the brand/model year. Yamaha and Mercury both have had good and bad production years. You don't need a 4-stroke - so dont let them sell you on fuel economy - there is not THAT big a difference. If you buy 2-stroke try to shoot for fuel injection (EFI/DFI). I have a Mercury 150 EFI Saltwater and it does fine on gas.
Above all else, if buying used, make sure it's an engine that's been run regularly and not something that's been sitting on their lot for a few months. It costs more to own a boat and NOT use it than it does to take it out every week. Those engines have to be run. If it's a used engine the first thing you're going to want to do (unless it's already been done by the dealer/seller - which is rare) is put new fuel lines, new filters, change out the lower unit oil. Make sure they haven't had the same gas sitting in the tank for a few months as this will need to be drained because the ethanol problem in marine engines (theres something else you can read up on).
The list goes on and on - definitely try to buy new if you can. But just remember when it comes to a used boat the biggest focus should be on the engine. Depending on size/type these things go for up to $20K-$30K.
Find a good, honest marine mechanic and have him check the boat out for your. Most will do a full head to toe inspection on the hull and engine. Have them do a full diagnostic workup on the engine. Check the plugs, compression, etc. Have them pull the hours of the engine. BOATS and ESPECIALLY MARINE ENGINES ARE EXPENSIVE. Don't assume you're going to sign a note for $15K and never spend another dime on it. Before you buy, get the model/numbers off the engine and do your homework on the brand/model year. Yamaha and Mercury both have had good and bad production years. You don't need a 4-stroke - so dont let them sell you on fuel economy - there is not THAT big a difference. If you buy 2-stroke try to shoot for fuel injection (EFI/DFI). I have a Mercury 150 EFI Saltwater and it does fine on gas.
Above all else, if buying used, make sure it's an engine that's been run regularly and not something that's been sitting on their lot for a few months. It costs more to own a boat and NOT use it than it does to take it out every week. Those engines have to be run. If it's a used engine the first thing you're going to want to do (unless it's already been done by the dealer/seller - which is rare) is put new fuel lines, new filters, change out the lower unit oil. Make sure they haven't had the same gas sitting in the tank for a few months as this will need to be drained because the ethanol problem in marine engines (theres something else you can read up on).
The list goes on and on - definitely try to buy new if you can. But just remember when it comes to a used boat the biggest focus should be on the engine. Depending on size/type these things go for up to $20K-$30K.