I have seen people diving that way on boats. But I don't understand the appeal
I use a primary reg on a longer hose, an identical backup reg on a shorter hose with a necklace, and a standard 2-button power inflator. No frills, no problems
What regulator and octopus do you run with your BP/Wing BC?
- Thread starter BubbleChaser
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
I use a primary reg on a longer hose, an identical backup reg on a shorter hose with a necklace, and a standard 2-button power inflator. No frills, no problems
I run a long hose 40 inches under the arm or a 60 inches wrapped for my primary and the secondary is on a necklace and a 22 inches hose. I use a Scubapro Mark 2 Evo first stage but that has been supplanted by a Scubapro Mark 11 for the rig below. Second stages are either G250 or G260.
Sometimes for tropical travel resort diving I configure for the DGX BCI combo reg/inflator and run a long hose primary (40 inches under the arm) with a G250. This is usually rigged with the Mark 11.
Sometimes for tropical travel resort diving I configure for the DGX BCI combo reg/inflator and run a long hose primary (40 inches under the arm) with a G250. This is usually rigged with the Mark 11.
Either or but not both. Unnecessary bulk and can be confusing in an OOA emergency.
Similar threads
