Question What needle do I use to sew nylon webbing?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Skydiving riggers are another great resource for getting thick / stiff webbing sewn. Ask if they’re qualified to do harness work, there’s a distinction between ratings to be able to modify harnesses and those folks generally have the right machines and skills to make strong webbing stitching that won’t have issues with weight bearing, etc.

Lance
 
Check that the sewing machine can handle the thick of nylon webbing. If it is sturdy like the 2" webbing used for weightbelts or harness, many machines will get stuck. In that case, better hand sew ot with a sailmakers needle- or take it to a shoemaker repair shop and they have tough machines and experienced in sewing such stuff, and it ain't expensive.

Also, be sure not to use cotton thread, these will eventually decay.

Personally, I secure my cameras with chord tied to the dog clip instead of 1/2" webbing.
Nah it’s flimsy 1” floppy nylon. Might even be polyester.
 
After my wife banned me from using her fancy Bernina, I discovered that any cobbler will do this for you for a couple dollars. If you are doing this a lot, you can buy a basic cobbler machine for $125.
 
Skydiving riggers are another great resource for getting thick / stiff webbing sewn. Ask if they’re qualified to do harness work, there’s a distinction between ratings to be able to modify harnesses and those folks generally have the right machines and skills to make strong webbing stitching that won’t have issues with weight bearing, etc.

Lance
closing the loop on this, Parachute Rigger was the move. Guy did it in about 5 minutes, full bar-tacking. Cost a 6er.

IMG_0722.jpg
 
Been using this for 30 years with waxed thread
Screenshot_20240701-230943_DuckDuckGo.jpg

For short runs, you don't really need a machine.
But my Sail-Rite sailmaker's sewing machine takes care of the longer runs.
 
Seriously one of the bestest most professional companies I have had the pleasure to purchase from

and their tutorials


and their boxes are strong and sexy


and here's what makes it all ultra magnificent

 
https://www.shearwater.com/products/swift/

Back
Top Bottom