What brand does this inflator hose connector fit?

[pelagic_one]

Hi all, I have some BCD inflator hoses with a different connector from the regular kind and also they do not fit Air2. The connector must be cocked to let the inflator post in, then the spring-loaded sleeve pops back to secure the fitting. There is no visible Shrader valve in the connector. See picture. Thanks for any input.

 

[Vitesse2l]

I can't help on the type of connection but looks like it could be swapped out easily.

 

[lexvil]

If it doesn’t fit anything you have toss it. It may be aqua lung, Mares if to small for an air 2 but can’t tell from pictures.

 

[DANDM]

Looks like a drysuit hose to me

 

[happy-diver]

https://www.parker.com/content/dam/videos/fcg/low-pressure-connectors-europe-division/25KA_Parker.mp4

Series 21 fits Seaquest Air Source, drysuits with the same male, precursor and fits CEJN
and can only be swapped out easily, if you start to swap it out, from the first stage end

 

[Johnoly]

The connector must be cocked ..... Thanks for any input.

Cocking hose connections are also used on low pressure LIQUID lines where a 'missed' connection attempt won't splash that liquid back out. It's used on waste and cleaning fluid lines usually for machinery.

 

[pelagic_one]

Thanks all!