In some countries, UK for example, kerosene is referred to as paraffin and you don't want to use that. Silicone oil is available on Amazon or just use mineral oil.
Uwatec Aladin Pro Nitrox
- Thread starter bradlw
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
thbcthomas
Contributor
Medicinal grade liquid paraffin.
I always reused the old oil and then top up with the new oil.
A small plastic syringe, without needle, is very useful to transfer the oil. I do not use an oil bath because it requires a lot of oil and it has no other purpose for me.
I always reused the old oil and then top up with the new oil.
A small plastic syringe, without needle, is very useful to transfer the oil. I do not use an oil bath because it requires a lot of oil and it has no other purpose for me.
WelshGasman
Registered
- Messages
- 38
- Reaction score
- 1
- # of dives
- 500 - 999
I had mine changed via Ebay form a guy in the UK.
He does not appear in this search aladin battery replacement for sale | eBay and the prices has gone up considerably. I seem to recall paying about £30 for mine a few years back.
According to the manual the computer uses Calculation Model ZH-L8 ADT
He does not appear in this search aladin battery replacement for sale | eBay and the prices has gone up considerably. I seem to recall paying about £30 for mine a few years back.
According to the manual the computer uses Calculation Model ZH-L8 ADT
Gone for diving
Contributor
After changing a few of these.
My next plan is to stick an 18650 or smaller battery in and make an other external screw contact or two, ( think it can be done with one contact, if my memory is correct).
So I can charge it externally..... and stop cracking it open.
My next plan is to stick an 18650 or smaller battery in and make an other external screw contact or two, ( think it can be done with one contact, if my memory is correct).
So I can charge it externally..... and stop cracking it open.
Similar threads
