Uwatec Aladin Pro - constant beeping after battery replacing

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Messages
3
Reaction score
1
Location
Czechia
Please help !

New battery, voltage OK, nothing on the display, beeps constantly like quick clicking.

Does not respond to reset (using CR2032).

Some idea? Or throw it in the trash?

Thank you !
 
Problem solved. New battery are too soft for start and reset. For more power I connect together baterry from mobile phone and disconnect after reset. So I finished battery replacing sucessfully :)
 
@Milan Abraham

We have experienced the same problem when servicing some of the old Aladin oil-filled computers. A 3V battery will not reset it. However, using a SAFT LS14500 3.7V battery (the same battery model that goes inside the Aladin) does the trick much easier.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom