OP
- Messages
- 17,615
- Reaction score
- 9,877
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Wasn't really necessary but I do like to play.
Closed Updated G250 "wolf"
- Thread starter buddhasummer
- Start date
Sold or no longer available
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
- Messages
- 17,615
- Reaction score
- 9,877
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Replacing these items in a G250 almost always guarantees perfect functioning.
Sometimes original lever works, sometimes not but with OG lever I can never be sure it hasn't been bent, I have seen springs obviously stretched out I assume in someone's attempt to get the reg to play nice.
Long balance chamber or short both work, OG short nets slightly lower cracking it seems, and sometimes long BC (30%) creates the dreaded spring creak/click when using adj knob.
Sometimes original lever works, sometimes not but with OG lever I can never be sure it hasn't been bent, I have seen springs obviously stretched out I assume in someone's attempt to get the reg to play nice.
Long balance chamber or short both work, OG short nets slightly lower cracking it seems, and sometimes long BC (30%) creates the dreaded spring creak/click when using adj knob.
OP
- Messages
- 17,615
- Reaction score
- 9,877
- Location
- Somewhere between here and there
- # of dives
- 2500 - 4999
Springs seem to be the biggest variable, it pays to have a few on hand if you're doing this conversion. I've noticed differences between new springs. I usually have some .218 springs on hand too.
Similar threads
