Trimming Neoprene Hood Bib

[USCScubaboy]

I currently have a wetsuit hood that I use with a Scubapro Evertech drysuit. The drysuit has a warm neck collar which is making it somewhat difficult to tuck the bottom of the hood in. Is it possible to trim the bottom of the hood so there's not as much material to tuck into the collar? Are there any special considerations to make regarding the stitching?

 

[Aqua-Andy]

No problem at all, I just cut the bib on the hood to the length I wanted, Haven't had a problem in 3 years with the stitching.

 

[tbone1004]

do you still use this hood when you're diving with a wetsuit? If so, just invest in a second hood. You can get a really nice one from Northeast Scuba for sub $20. They have diverite and aqualungs that are non skirted.
Wetsuits - Hoods - No Bib Hoods - Dive Rite Hoods - Northeast Scuba Supply
Wetsuits - Hoods - No Bib Hoods - Deep See 6.5mm Zippered Coldwater Dry Hood Closeouts - Northeast Scuba Supply

 

[USCScubaboy]

Sorry, should have clarified. I'm only planning on using this hood with my drysuit. I have a separate hooded vest to go with my wetsuit so there won't by any issue there. Going to try and trim the hood tonight.

 

[TechDeep]

I've never done it, but I've heard a lttle aqua seal on the cut edges might be a good idea.

 

[openhelix]

I've cut the bib off my hoods as well. I've found using a hot knife works best as it seals the neoprene when it cuts.