KATESCUBAPRO
Contributor
Our TRIMIX algorithm for Galileo dive computers is now available for all certified TRIMIX divers.
You can download the TRIMIX algorithm free of charge onto your Galileo computer if you have 1.6 or higher firmware installed in a Galileo Sol. On Galileo Luna and Terra models, the PMG upgrade is required along with the 1.6 firmware.
--The most recent Galileo Sol firmware is available for download on our website.
--No scratch card is necessary to upgrade the TRIMIX algorithm.
--However, it's important that divers know
(1) it is for certified TRIMIX divers and
(2) although the TRIMIX can be turned ON or OFF on the Galileo, only divers planning to actually dive with TRIMIX should install the algorithm.
IMPORTANT WARNING: If a diver should want to return their Galileo to the original algorithm, removing the TRIMIX one, they will have to downgrade to version 1.7 of the firmware (available on scubapro.com) as re-installing the 1.6 or older version may completely block the computer.
To download the TRIMIX upgrade go to: http://www.scubapro.com/galileo
To download the 1.7 firmware (downgrade, if you need to uninstall your TRIMIX) go to:
http://www.scubapro.com/instruments/computers/products/galileo-firmware-17.aspx
The Serial and ID numbers must be included and the disclaimer checked off. It is imperative to read the Read me document and TRIMIX manual included in the upgrade, before installing the trimix software onto your dive computer. Please inform your TRIMIX diving customers that there is an important warning in the 'Read me' document similar to the note above, in case they may want to uninstall the TRIMIX algorithm.
You can download the TRIMIX algorithm free of charge onto your Galileo computer if you have 1.6 or higher firmware installed in a Galileo Sol. On Galileo Luna and Terra models, the PMG upgrade is required along with the 1.6 firmware.
--The most recent Galileo Sol firmware is available for download on our website.
--No scratch card is necessary to upgrade the TRIMIX algorithm.
--However, it's important that divers know
(1) it is for certified TRIMIX divers and
(2) although the TRIMIX can be turned ON or OFF on the Galileo, only divers planning to actually dive with TRIMIX should install the algorithm.
IMPORTANT WARNING: If a diver should want to return their Galileo to the original algorithm, removing the TRIMIX one, they will have to downgrade to version 1.7 of the firmware (available on scubapro.com) as re-installing the 1.6 or older version may completely block the computer.
To download the TRIMIX upgrade go to: http://www.scubapro.com/galileo
To download the 1.7 firmware (downgrade, if you need to uninstall your TRIMIX) go to:
http://www.scubapro.com/instruments/computers/products/galileo-firmware-17.aspx
The Serial and ID numbers must be included and the disclaimer checked off. It is imperative to read the Read me document and TRIMIX manual included in the upgrade, before installing the trimix software onto your dive computer. Please inform your TRIMIX diving customers that there is an important warning in the 'Read me' document similar to the note above, in case they may want to uninstall the TRIMIX algorithm.
