Spanner wrench for Zeagle Flathead VI

[Dive-aholic]

Where can I get one? The wrenches I have are too "thick" for the 1st stage and I can't find one at the usual sites.

 

[Tortuga68]

What size and torque? Snap On make some low-torque tappet adjustment wrenches that might be suitable. Or you can grind down a standard wrench if you don't feel like spending that much money

Or do you mean the pin or C spanner? http://www.divetub.com.au/service-kits-tools/zeagle-pin-spanner

 

[divad]

Zeagleexpress.com

 

[ScottZeagle]

Where can I get one? The wrenches I have are too "thick" for the 1st stage and I can't find one at the usual sites.

Part # 347-0001 - Pin Spanner for Diaphragm Clamp for ALL Zeagle regs.

Part # 347-0003 - Pin Spanner for 1st Stage Cap (Flathead VI only)

Any Zeagle dealer shoud be able to order you one....

Thanks,

Scott

 

[Dive-aholic]

Tortuga, the one in your link is the one I need, but they don't ship outside of Australia.

evad, zeagleexpress doesn't have it on their website, already checked...

Thanks, Scott. It's the 0003 part. I will check around today and see what I can find. Unfortunately, I don't have any Zeagle dealers anywhere close to me.

 

[gibby_z]

Yes we do.

Pin Spanner for 1st Stage Cap (Flathead VI only)

It was a 2nd option on the other spanner.
I separated them out for you.

It can ship today.

 

[Dive-aholic]

Thanks. For some reason it didn't show up in my google search the other night. I also looked around the site but didn't find it there. I wonder if google has an old page cached.

 

[divad]

Make him give you the 30% discount.

 

[gibby_z]

It wasn't listed properly and I haven't updated the google site map in awhile.
Should be all fixed now.

and I don't think the z30 programs applies to tools.