These 80’s have handles on them, I use them for breather b.o. but I sm them just the same. Handles at 10 and 2, bottom clips facing your calf. My dedicated sm cylinders don’t have the handles, but these do as I may have to hand them off.
The bungie comes around the outside of the valve and hooks on the manifold end. That way the bungie tension rolls the cylinder outward, and into your side to lock them down. And the handles end up pointing out or slightly up.
So start with your cylinders like this with the regs on, and we’ll go from there.
The bungie comes around the outside of the valve and hooks on the manifold end. That way the bungie tension rolls the cylinder outward, and into your side to lock them down. And the handles end up pointing out or slightly up.
So start with your cylinders like this with the regs on, and we’ll go from there.