Scubapro O-ring Sizes

[Scubagaskets]

Fantastic, couv! Very nice work on that table.
Yes, I use McMaster-Carr for 90% of my o-rings. Did I miss that one? Do you have a PN for the equivalent to that Precision 2.2 x 1 mm that I photo'ed?
Is there an EPDM one?

this HTML class. Value is http://scubagaskets.

 

[Scubagaskets]

Well, I'm a little OCD over that lightweight poppet.
I'll stick with 2.2mm, (and the separate shipping charge, lol).
Thanks for checking, couv!

 

[Scubagaskets]

Fantastic, couv! Very nice work on that table.
Yes, I use McMaster-Carr for 90% of my o-rings. Did I miss that one? Do you have a PN for the equivalent to that Precision 2.2 x 1 mm that I photo'ed?
Is there an EPDM one?

this HTML class. Value is http://scubagaskets.

 

[Fibonacci]

Fibonacci,
Yes, SP has been known to use both imperial and metric, and you head correctly about the band clamp hardware.

Thanks again Couv, -212 (ID 7/8" x 1/8") was the correct o-ring, fits perfectly with just the right amount of preload

 

[Couv]

Well done mate. I'm just sitting here in an armchair. You got the leak fixed in record time.

 

[Couv]

this HTML class. Value is http://scubagaskets.

Scubagaskets your links are not working. Try this:
O-Rings Supplier for Scuba Diving EPDM-VITON-NBR-POLY O Ring Kits

I just had a gander at your chart for ScubaPro. While it is helpful, it is in need of update to include the current seals. One thing I noticed is your poppet seal used on most of SP's balanced second stages shows the old size rather than the current one. This might be significant if the current s-wing poppet and balance chamber is used.

Could I also suggest you update the models included on the list?

Cheers,

Couv

 

[Diverspoint]

Then you'll know why you always have those LITTLE TEENY bubbles coming out of your mouthpiece.

You don't have to measure them, couv. The bubbles are 0.1mm diameter.

Until they go up that is

 

[Scubagaskets]

Scubagaskets your links are not working. Try this:
O-Rings Supplier for Scuba Diving EPDM-VITON-NBR-POLY O Ring Kits

I just had a gander at your chart for ScubaPro. While it is helpful, it is in need of update to include the current seals. One thing I noticed is your poppet seal used on most of SP's balanced second stages shows the old size rather than the current one. This might be significant if the current s-wing poppet and balance chamber is used.

Could I also suggest you update the models included on the list?

Cheers,

Couv

Yes you can send me any sugestion by email .thanks
info@scubagaskets.com

 

[Scubagaskets]

Yes you can send me any sugestion by email .thanks

Info@scubagaskets.com

 

[Scubagaskets]

Thanks again Couv, -212 (ID 7/8" x 1/8") was the correct o-ring, fits perfectly with just the right amount of preload

NBR 70 O-Rings SOFT 212 - Premium O-rings Provider for Scuba Diving