Scubapro MK2 Yoke => DIN?

[mahjong]

Does anyone know if a Scubapro MK2 Yoke regulator can be converted to DIN?

 

[IanBrit]

Yes, it can (or at least my Mk II has a DIN fitting on it)

 

[Couv]

The illustrated parts diagram I have shows it as the same part number as the MK10/20/25 universal DIN kit. In fact, I think all SP first stages use the same DIN part except the MK5/6//7 You can download the MK2 diagram here: https://backup.filesanywhere.com/fs/Link.aspx

 

[rhwestfall]

yep, that is all the correct information. just did that....

 

[Kunundrum]

Just remember not to screw up the placement of the O-Ring or the HP port (SPG) won't work.

 

[redacted]

The illustrated parts diagram I have shows it as the same part number as the MK10/20/25 universal DIN kit. In fact, I think all SP first stages use the same DIN part except the MK5/6//7 You can download the MK2 diagram here: https://backup.filesanywhere.com/fs/Link.aspx

But it does have to be the universal retainer as the older style retainers on the Mk10/20 will not have the shoulder to hold the o-ring in the Mk2 application.