Scubapro mk 10

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

TDR1

Registered
Messages
31
Reaction score
1
Location
London
# of dives
500 - 999
Hello,
I bought this new in 1987 in Littlehampton, Sussex in the UK. I used it regularly up until 2006. I had it serviced last summer, after being in the shed for four years. I usually dive a twinset now with Poseidon Xstream reg's. But last weekend I dived it. I didn't quite realise how cold the water was it turned out it was 4 degrees.
My one overriding question is,
Is it safe??
I seem to remember having to squirt a tube of grease into the holes on the first stage. Should I still do this?
I have to say I feel like Jacques Cousteau when I dive it.
Ty.


Sent from my iPhone using Tapatalk
 
You could pack it with either silicone or an O2-safe lube if you're planning on using higher concentrations of O2. If your MK10 is one of the later ones that has a groove for the spec boot, you can try to find a boot and that will help hold the grease in place. My doubles set up is a pair of packed MK10s.
 
Mk10s have been my mainly used, for years mainly without grease.

And Aussie made Airdive regs of same design with grease.
 
Thanks,
I think I'll get some silicone grease to squirt in the holes.



Sent from my iPhone using Tapatalk
 
For anyone that's interested, probably no one, it turns out I've got a Mk X Dual balanced. This was only sold in Europe apparently.


Sent from my iPhone using Tapatalk
 
So that's just a MK10 with a balanced adjustable, correct? What else could dual balanced mean?

How about the gold plated MK10? I was a little surprised to see that, I thought Europeans were supposed be smart! hehe..
 
Yes, thats the one. Although all the writing came off after about dive 10. Apparently the first stage is balanced to.
Gold plated mmmmm!
Now I don't know who told you Europeans were smart. Thirty odd countries who all hate each other it will never work. Although they all hate us , the English, the most.
The one thing that surprises me the most about my reg is that I've still got that plastic blue key thing! How I haven't lost it after 25 years I'll never know!!
Thanks


Sent from my iPhone using Tapatalk
 
Hello,
I bought this new in 1987 in Littlehampton, Sussex in the UK. I used it regularly up until 2006. I had it serviced last summer, after being in the shed for four years. I usually dive a twinset now with Poseidon Xstream reg's. But last weekend I dived it. I didn't quite realise how cold the water was it turned out it was 4 degrees.
My one overriding question is,
Is it safe??

My first regulator was a Mk X/Balanced Adjustable purchased new in 1987. I purchased a new Mk X/G250 in 1988, and a second Mk X/Balanced Adjustable shortly after that. I upgraded two of the Mk X's to Mk X Plus's sometime in the early 1990's and at about the same time purchased a D400 second stage to use with one of them. I still have all of these regs, still dive them, love them. Prefer them--except in very cold water when used with high pressure (3500 psig) tanks.

After experiencing a couple of free-flows on deeper, cold water (~40 degrees F) dives during back-to-back dive outings to Lake Huron (USA) shipwrecks using my Mk X Plus's on "cave-filled" HP tanks, I decided to purchase Poseidon Odins to use for these types of dives. I considered filling the Mk X Plus's ambient pressure chamber with silicone grease to reduce the likelihood of 1st stage freeze-up, but ultimately decided that I wanted cold-water regs which had a diaphragm 1st stage conservatively rated to 300 Br (to more reliably handle the cave-fills) and which could easily deliver air [sic] at extended range depths. (As you probably know, the early 1990's was a time of "deep air" and "advanced deep air" diving in some locales.) Moreover, at that time, there was some concern about the Mk X's internal HP O-rings extruding when the Mk X was used with HP tanks. The switch to "Hyperthane" O-rings in the Mk X, then the new Mk X Plus, followed by the Mk XV all were attempts to address these concerns, iirc. (I hope someone will correct me if I've got this wrong.)

I hope this is of some help.

Ronald
 

Back
Top Bottom