Scubapro Meridian Scroll/Planner mode

[Tati1987]

Good part of the day, guys!

I am having a question regarding my new Meridian dive computer:

Is there any way I can access "scroll" mode for viewing no-stop times (as far as im aware of, with 3m depth increments). Whenever I am in Planner mode, the depth is fixed on 42m and I seam to be unable to change it neither up or down!

Its really frustrating... I went through the manual, but couldnt find anything that helps...

Thank You!

 

[JulesSCUBAPRO]

What is the O2 setting? With a 27% mix, you are limited to a max depth of 42m, but scrolling up to that depth, in 3m increments, should still be possible.

 

[Tati1987]

@JulesSCUBAPRO
Thank you for reply! Went through Gas settings: Gas1 was set with 21%; but Gas d was on 37%. I've removed any percentage settings from it.
So the dive planner seam to work: Can scroll it starting from 9m up to 45.. not that I'm going that deep Having 2 dives tomorrow with max of 8m, so planner isn't really helpful in this case. Hoping that the basic calculations will b allrite, though
Happy diving