Scubapro BCD with rotary inflator

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

The others are right, there is an O-ring missing, more specifically, O-ring #26 from the picture. There was however some sort of sleeve as well. I'll be right honest here, I can't recall if it was a gasket or sleeve.
View attachment 909033
  • This O-ring (01.050.254) is a standard O-ring. BS1806-213 (3.53mm x 23.39mm).
  • The O-ring (01.050.228) on newer ScubaPro BCDs is also a standard O-ring. BS1806-120 (2.62mm x 25.07mm).
I would suggest buying either in 70 Shore A and the original ones are EPDM. You won't do anything wrong with NBR though.
No dump valve.
Could you share the manual from where you took that screen shot ?
Thanks.

IMG_6547.JPG
 

Back
Top Bottom