I got my regs in good order and went to look at the BC. I found the power inflator was leaking where it attaches to the hose, and realized that what I picked up was probably an Air2. Can anyone provide me with the maintenance sheets for the Air2?
Additionally, the plastic clamp that keeps it on the inflator hose doesn't seem to tighten far enough. Should I a) shave down the sides of the clamp so I can tighten it further or b) grab an automotive hose clamp. Additionally, it looks like the previous owner had some sort of junk coating the attachment point. Looks somewhere between teflon and silicone. Anyone know what that's about?
Cheers
Additionally, the plastic clamp that keeps it on the inflator hose doesn't seem to tighten far enough. Should I a) shave down the sides of the clamp so I can tighten it further or b) grab an automotive hose clamp. Additionally, it looks like the previous owner had some sort of junk coating the attachment point. Looks somewhere between teflon and silicone. Anyone know what that's about?
Cheers