Redundant Buoyancy - open to criticisms.

[SelfDiver]

https://www.msrgear.com/water-treatment/storage-bags/dromedary-bags/dromedary-bags.html
Carabiner Clip | Aluminum Wire Gate Carabiners | RALLT
The four wire gate carabiners clip to the hip and shoulder D-rings (DIR harness does not have a hip D-ring on the right so you would need to add that)

Corrugated Hoses
Hose clamp for the cap
Corrugated Hose Clamp Kit, each (Qty 2 required)

The hose clamp works better than the zip tie for the cap
The inflator head can use two zipties.
K-Style Power Inflator for 1-inch Corrugated Hose or any other one that you have lying around.

 

[ginti]

Not sure about the advantages and disadvantages Vs other solutions (dry-suit, double bladder wings, etc.)

 

[wetb4igetinthewater]

 

[grantmac]

Trade the elastics for bungee and bolt snaps.

 

[inquis]

Can you describe the scenario in which you'd need this?

 

[GF99/99]

Can you describe the scenario in which you'd need this?

+1 I'm curious too.

Also no OPV, ticking balloon waiting to be popped

 

[rjack321]

View attachment 871515
https://www.msrgear.com/water-treatment/storage-bags/dromedary-bags/dromedary-bags.html
Carabiner Clip | Aluminum Wire Gate Carabiners | RALLT
The four wire gate carabiners clip to the hip and shoulder D-rings (DIR harness does not have a hip D-ring on the right so you would need to add that)
View attachment 871516
Corrugated Hoses
Hose clamp for the cap
Corrugated Hose Clamp Kit, each (Qty 2 required)
View attachment 871520
The hose clamp works better than the zip tie for the cap
The inflator head can use two zipties.
K-Style Power Inflator for 1-inch Corrugated Hose or any other one that you have lying around.

Looks good for a Boegart's style bladder. I have something similar but its my only BCD when in my sump wetsuit. As a some kind of redundant bladder this is missing the mark TBH

 

[Umuntu]

View attachment 871515
https://www.msrgear.com/water-treatment/storage-bags/dromedary-bags/dromedary-bags.html
Carabiner Clip | Aluminum Wire Gate Carabiners | RALLT
The four wire gate carabiners clip to the hip and shoulder D-rings (DIR harness does not have a hip D-ring on the right so you would need to add that)
View attachment 871516
Corrugated Hoses
Hose clamp for the cap
Corrugated Hose Clamp Kit, each (Qty 2 required)
View attachment 871520
The hose clamp works better than the zip tie for the cap
The inflator head can use two zipties.
K-Style Power Inflator for 1-inch Corrugated Hose or any other one that you have lying around.

Maybe this should have been posted in the DIY forums — “Making you own Gear.”

 

[happy-diver]

 

[Umuntu]

View attachment 871528

Are the threads of the MSR bladder compatible with the OPV / hose elbow ?

Which brand of elbow is that ?