Question on Airsource 3
- Thread starter BigRed96
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
axxel57
Contributor
On the schematics I cannot see any threads on the inlet fitting, just two o-rings, which hold it in place, strange......
Try with liquid silicone, move the fitting forth and back carefully with an adjustable wrench and see if it moving, so you can pull it out.....
Good luck!
Try with liquid silicone, move the fitting forth and back carefully with an adjustable wrench and see if it moving, so you can pull it out.....
Good luck!
Similar threads
