Pricing suggestions for aluminum 80

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Around me, a 6351 tank is almost impossible to get a VIP for & almost impossible to get filled if you do find someone that will put a sticker on it after it gets a fresh hydro stamp. I pay about $10 for them. I then cut them up & use them for aluminum stock when making things on my lathe or mill. I am not looking for any more at this time.

Around me the going rates for in-hydro modern 80 cf aluminum tanks on Craig's list are -
Shiny with nice valve - $100
Beaten up looking with good valve - $75
Beaten up with older valve - $50-70
Some guys ask for a bit more, but that is what I see them sell for.

Out of hydro tanks - often sit without selling for months.

I just found some steel 120 tanks with new hydro for $150 each

Hydros with VIP & fill cost $30-40 per tank depending on where you go in my area. If you go straight to a hydro facility & don't get the VIP or fill, it costs less
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom