Poor boy's light rig.

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I need to find the same material around here for the diffuser. Once my lights come in I will head to the gun/light store and see if I can find a 68mm flip up filter, then I can glue the diffuser in side.
I have so many ideas for my tray, can't wait for my lights and camera to come!!!
 
I need to find the same material around here for the diffuser. Once my lights come in I will head to the gun/light store and see if I can find a 68mm flip up filter, then I can glue the diffuser in side.
I have so many ideas for my tray, can't wait for my lights and camera to come!!!

I looked into that Tap Plastics mentioned on some other posts and there are no stores in my area. I found a suitable idea on the link bellow. If you are in the US, Home Depot or any other hardware store sells "clear acrylic panels" for light fixtures..

Reference: http://www.safecavediving.com/documents/NACD_Tec_Bulletin_Rev_8_06-15-2012.pdf
 

Back
Top Bottom