Try to locate version 1.4... a quick google search should find a site that has it available. 1.4 doesn't have the bugs that 1.5 seems to. If you're pc is set up right, it will work with either version of divemanager. Chances are that you have a conflict somewhere. If you're not a computer expert, you may have to seek one out. V 1.5 will not find the interface regardless of the computer... but it will transfer data even though it does not find the interface if you have everything set up correctly. I would also try reinstalling divemanager. The reason why suunto doesn't offer a usb interface is that they would really have to just about do a complete redesign of the actual interface which isn't the best idea for them considering we can buy an adapter for about $5. When they designed the interface, all computers had serial ports and less than half probably had usb ports. The software as well as the interface are set up for serial ports so I'm sure its not worth their time to change everything when there is a cheap alternative. It isn't suunto's fault that computer makers started leaving off serial ports ya know...
I tend to think your problem has something to do with the palm software since you did have it installed. Rest assured, the problem is probably pretty simple and its most likely that something is set wrong on your pc. Thats just my experience from dealing with a great number of people that have experienced problems using my interface (and suunto's).
I tend to think your problem has something to do with the palm software since you did have it installed. Rest assured, the problem is probably pretty simple and its most likely that something is set wrong on your pc. Thats just my experience from dealing with a great number of people that have experienced problems using my interface (and suunto's).