komi hunter
Contributor
There is a new paint out called H2O it is made for use in water AND it is made to be used on rubber!!! WAY COOL !!!!!! I will let you know how it works on my V12's
Painting Fins....
- Thread starter komi hunter
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
ScubaSarus
Guest
I'm interested in that can you provide me with some info were to get some. Sticking to the plastic is the main concern no it being water resistant.
OP
komi hunter
Contributor
I found it at wal-mart I am getting my V-12 this week and am going to paint them and see how it last. If you have fins that are more of a plastic try Fusion.
OP
komi hunter
Contributor
Paint sticks great, until you bend them and then it cracks and chips off of my V12's
The Natural
Contributor
Try spray paint
OP
komi hunter
Contributor
That is what I used it is a new paint called H2O and is made to be used on rubber but as soon as the fin bent it cracked and fell off.
The Natural:
The Natural
Contributor
Hmm...somone suggested Krylon "Fusion" in another thread. I'm going to try it out on my Jet Fins when I buy them. I'm putting FAH on one fin and -Q on the other. :lol: Yes childish, but then again I laugh at fart jokes.
designbysue
Contributor
See my post here
http://www.scubaboard.com/showthread.php?t=109431 for samples of what I did using Krylon Fusion
http://www.scubaboard.com/showthread.php?t=109431 for samples of what I did using Krylon Fusion
OP
komi hunter
Contributor
Fusion is deigned to be used on plastic and the V12's are actual rubber so the fussion won't work on them.
designbysue
Contributor
Worked on mine! I also tried "American Tradition Plastic Enamel" by Velspar and the results were bad - it cracked when dry. Fusion bonds quite well and doesn't crack.
Similar threads
