jknightindy
Registered
Would love to get your opinions - If you could buy either the DGX Gear D6 or the Dive Rite FT1/XT2 reg set for your pony bottle setup for the EXACT same price, which one would you go with and WHY?
Opinions Please: DGX Gear D6 or Dive Rite FT1/XT2 for Pony Setup
- Thread starter jknightindy
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
MidOH
Banned
Balance Piston Din First Stage "For Pony / Stage Bottles!" "Nitrox Ready!"
We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety Our first stage has 1 7/16 high pressure port It also has 3 3/8 low pressure ports to meet all your...
www.piranhadivemfg.com
Low Profile Spare Cylinder Regulator "Nitrox Ready"
Great for use with either Pony bottles, drysuit or even as a compact regulator set-up! Nitrox Ready Screws right into our cylinder! 3/4-14 threads Has a two stage to reduce pressure to the regulator Low pressure hose comes in from the top side of this valve Has 1 low pressure port "See below" 1...
www.piranhadivemfg.com
Pair up with the Dive Rite Xt4.
If this is for a pony bottle, neither. I'd go with this since a pony is a back up in case the stuff hits the fan. You only need it to get you to the surface. Once you go to the pony, the dive is over.
www.divegearexpress.com
The first is solid, reliable, easy to service yourself as is the 2nd.
DGX Custom - DGX Gears FIRST/D6 O2/Stage Reg Package
The DGX O2 Deco Regulator is suitable for Oxygen Service without the need for additional preparation. A value priced but quality flow-by piston DIN first stage and balanced adjustable second stage that delivers improved performance in appropriate deco depths for 50% to 100% oxygen.
www.divegearexpress.com
Balance Piston Din First Stage "For Pony / Stage Bottles!" "Nitrox Ready!"
We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety Our first stage has 1 7/16 high pressure port It also has 3 3/8 low pressure ports to meet all your...
Low Profile Spare Cylinder Regulator "Nitrox Ready"
Great for use with either Pony bottles, drysuit or even as a compact regulator set-up! Nitrox Ready Screws right into our cylinder! 3/4-14 threads Has a two stage to reduce pressure to the regulator Low pressure hose comes in from the top side of this valve Has 1 low pressure port "See below" 1...
Pair up with the Dive Rite Xt4.
The first stage in the Piranha page is the same as the DGX. They are both unbalanced flow by piston regulators. Very similar to the older Scubapro Mark 2. However, the Mark 2 Evo is considerably improved both in flow capacity and cold water suitability and also meeting EN250A specs compared to the Mark 2 or either of these regulators.
Similar threads
