mk2 takedown video

[Candiru]

Awap, Halocline, DA Aquamaster what do you think of this video. Anything missing?

SCUBAPRO MK2 - YouTube

 

[superstar]

great job, thanks.

 

[Candiru]

Just for clarification, I did not produce this I just stumbled across it on you-tube and will be using it as a referance for my first attempt at a rebuild.

 

[JBRES1]

No expert here, but he didn't change out the seat or the o-rings.

Nice video of the reg.

Thanks for the find.

Jim Breslin

 

[halocline]

Es bueno, pero porque no cambiaron el asiento ni los toricos? Tambien me choca la musica.

 

[redacted]

It is nice working on a clean, freshly serviced regulator. I have never seen a din retainer like that before. It clearly shows how simple the Mk2 is. I prefer to really load up the lube on the dynamic o-rings. And I don't lube the exposed o-ring that seals the tank valve. It is a bit of a shame to have gone through all that and not demonstrated the removal of the HP seat. Finally, I doubt if he even came close to the spec torque on the din retainer.

In spite of a few differences, I bet that regulator will work just fine for quite a while. This should be a very helpful video for those looking to get started on DIY.

EDIT: What music?

 

[Candiru]

Is anybody intrested in putting a video together for the mk10, that is what I would really like to see.

 

[redacted]

Is anybody intrested in putting a video together for the mk10, that is what I would really like to see.

There is one I saw on this board years ago. I'm sure it is still around somewhere.

This may be the one I was thinking of but it just covers packing and assembly.
http://www.youtube.com/watch?v=VMuwDFKY2-w

 

[superstar]

This is a mk-5 video. Similar to the mk-10.
Brad's helmet cam, scuba regulator - YouTube

 

[lsorenson]

I would really like to see that done with a SR1... (hint hint...)