ams511
Contributor
The annotated diagram Zung posted is very helpful but a bit busy. It may be better to download the MK-10+ and refer the buyer to section on the MK-10 upgrade. There it clearly shows the differences in the parts count between the MK-10 and the MK-10+. View attachment MK-10 conversion.pdf
I agree with Herman that all communication should go through eBay, I had problems with a seller and when ebay looked at the emails they sided with me right away.
---------- Post Merged at 02:38 PM ---------- Previous Post was at 02:35 PM ----------
The MK-10+ has a washer between the retainer o-ring and the body of the reg which according to the schematic the MK-10 doesn't.
I agree with Herman that all communication should go through eBay, I had problems with a seller and when ebay looked at the emails they sided with me right away.
---------- Post Merged at 02:38 PM ---------- Previous Post was at 02:35 PM ----------
High IP and missing washers are a contradiction. If both exist, then there is something more serious wrong, like a defective spring.
The MK-10+ has a washer between the retainer o-ring and the body of the reg which according to the schematic the MK-10 doesn't.