Important Tern TX firmware update due out on April 14th

[Eric_K]

Came across this update advisory for TernTX - and thought would be a good idea to share here.

The summary is pretty simple, if you have a single gas configured for Nitrox mode but are using the Air mode, the software v34, the computer will use the gas configuration if other than 21%. Shearwater provides a pretty simple workaround, but I'd think many users of TernTX will want to apply this update!

Product Bulletin Tern / Tern TX

IMPORTANT NOTICE Prior to using any Tern or Tern TX dive computer please review the following information. A serious issue has been identified with Tern and Tern TX v34 firmware. A fix is coming Monday April 14th, but in the meantime it is important to take a precautionary measure. Impacted...

shearwater.com

Apologies if previously shared...

 

[tursiops]

Came across this update advisory for TernTX - and thought would be a good idea to share here.

The summary is pretty simple, if you have a single gas configured for Nitrox mode but are using the Air mode, the software v33, the computer will use the gas configuration if other than 21%. Shearwater provides a pretty simple workaround, but I'd think many users of TernTX will want to apply this update!

Product Bulletin Tern / Tern TX

IMPORTANT NOTICE Prior to using any Tern or Tern TX dive computer please review the following information. A serious issue has been identified with Tern and Tern TX v34 firmware. A fix is coming Monday April 14th, but in the meantime it is important to take a precautionary measure. Impacted...

shearwater.com

Apologies if previously shared...

Yes, already shared , in the Shearwater forum. Better twice than zero.
The fix actually was disseminated yesterday.

 

[Eric_K]

Thanks for sharing that, I should have looked for a dedicated Shearwater forum.