CALI68
Contributor
Here: If the buckle is laying flat on it's back it's down in the first slot, up through the second slot, down in the third slot back up the first slot, tighten it up and you are good to go. I loosened it up a bit so you can see.
I need help threading my buckle, and I have already searched
- Thread starter Furner
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
dbulmer
Contributor
Furner,
Using your picture as a reference.
The webbing goes down, then up then down again. The free webbing ends up on the smooth part of the buckle - you have it the other way around. The excess is stowed behind any bike tube you've added.
Using your picture as a reference.
The webbing goes down, then up then down again. The free webbing ends up on the smooth part of the buckle - you have it the other way around. The excess is stowed behind any bike tube you've added.
Similar threads
