I forget what lbs lift my wing is...

[offroaddiver]

I have a DSS wing that i bought either a year or two ago and it doesn't have any markings as to the lift or the markings wore off. It is the LCD model with a zipper across the top and mesh on the bottom for draining. the dimensions when empty and flat are: 20'' wide and 26'' tall. if tobin or someone can give me some feedback it would be appreciated.

 

[mwhities]

Sounds a lot like mine but don't quote me. Mines a LCD 30#. Is yours a singletank or dual tank?

You could also ask Tobin in DSS's only forum. DSS on SB

Michael

 

[cool_hardware52]

I have a DSS wing that i bought either a year or two ago and it doesn't have any markings as to the lift or the markings wore off. It is the LCD model with a zipper across the top and mesh on the bottom for draining. the dimensions when empty and flat are: 20'' wide and 26'' tall. if tobin or someone can give me some feedback it would be appreciated.

Best to pose question to me via PM or in the DSS forum, I don't see all the posts in the general forum.


Sounds to me like a LCD 40, the 40's are just a tad over 20inches wide. The LCD 30's are are just about 19 inches wide.

If you are unsure you can verify the capacity with a scale, weigh the wing empty, and then fill it with water and weigh it again, the difference is the capacity.

Tobin

 

[offroaddiver]

thanks for the info. I was curious because i may have to buy a bp/w setup for a friend who i'm getting very close to dragging into getting cert for scuba.