How to properly clean your regulator.

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Quick question ... after a fresh-water dive I put the dust cap on and then put the first and second stage reg's in some lukewarm water to soak for a little while. Unfortunately, a visiting friend decided to press the purge button on the octo :shocked2:

I immediately attached the reg to a tank and pressed the purge valve on both the normal reg and octo a few times to blow out as much water as possible, and then hung the reg's up with the 1st stage at the top and the second stages at the bottom.

Anything else I should do or am I good to go?
 
Quick question ... after a fresh-water dive I put the dust cap on and then put the first and second stage reg's in some lukewarm water to soak for a little while. Unfortunately, a visiting friend decided to press the purge button on the octo :shocked2:

I immediately attached the reg to a tank and pressed the purge valve on both the normal reg and octo a few times to blow out as much water as possible, and then hung the reg's up with the 1st stage at the top and the second stages at the bottom.

Anything else I should do or am I good to go?

Should be good.
 

Back
Top Bottom