Halycon P Valve Question

[WVMike]

Does anyone know the dimensions of the tubing on the Halycon P valves?

How about a source and part number for quick connects?

I am looking for ID and OD. Need to get a coupling and some more tubing.

TIA

 

[WVMike]

Does anyone know the dimensions of the tubing on the Halycon P valves?

In case anyone else is looking for this info at their finger tips, I measured the hose last night.

1/2 inch OD
1/4 inch ID
1/8 inch wall thickness

 

[HenrikBP]

Here's the sizes and part numbers I found and use:

http://www.scubaboard.com/forums/exposure-suits/320857-p-valve-plumbing-size-2.html

Henrik

 

[WVMike]

Here's the sizes and part numbers I found and use:

http://www.scubaboard.com/forums/exposure-suits/320857-p-valve-plumbing-size-2.html

Henrik

Thanks Henrik. Wish I had seen this a few days ago. After measuring my "hose" I ordered the same parts from McMaster, except I went with the 1/4 inch QD. Good tip on 3/8 QD. Its all part of the learning curve.

 

[HenrikBP]

Hi Mike,

I initially bought 1/4" ID fittings as well, but returned them to McMaster for the 3/8" parts. I doubt that it makes that much of a difference as far as flow, but the 3/8" seems to be what many others are using, so you may have better odds of getting spares in the field.

Henrik

 

[Randy43068]

I had to use half inch hose and fittings------------ if ya know what I mean.