We have a good compressor!
I was able to retap the 6mm screw holes and put in two new ones. The cam lobe attached perfectly to the crank. I replaced the #3 piston/sleeve and intake/outflow valves in #2 and #3.
She purrs like a well oil kitten! I was able to get 3000 psi in about 2 minutes. I did set the #3 relief at 3200 psi.
It looks like I've got myself a fine system now! Thanks to everyone who replied to this thread and PM'd me. You advice was invaluable and definately helped me solve the 1200 psi problem.
THANKS!!!
FB
I was able to retap the 6mm screw holes and put in two new ones. The cam lobe attached perfectly to the crank. I replaced the #3 piston/sleeve and intake/outflow valves in #2 and #3.
She purrs like a well oil kitten! I was able to get 3000 psi in about 2 minutes. I did set the #3 relief at 3200 psi.
It looks like I've got myself a fine system now! Thanks to everyone who replied to this thread and PM'd me. You advice was invaluable and definately helped me solve the 1200 psi problem.
THANKS!!!
FB