Was diving yesterday and found quickly after i herd a snap that my dump button spring snapped in 2 on my AIR 2 3rd gen..... now my bc will not hold air as there is not enough pressure to hold the seal. Is there anyway to get a replacement?
Dump button spring AIR 2 3rd Gen.
- Thread starter wildturk
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Being that it's scubapro and a regulator my money is on them not selling parts directly to end users. You will likely have to take it in to a dive shop that services scubapro or mail it off somewhere. Or get it from ebay.
Parts like this are available to your local SP shop. Springs are usually only found to be faulty when they fail and are not normally replaced during regular service.
I will not be surprised if you are able to just find someone to simply replace this spring cheap. Opening that part will give you an idea how the rest of the unit looks.
I will not be surprised if you are able to just find someone to simply replace this spring cheap. Opening that part will give you an idea how the rest of the unit looks.
Try another shop. The annual in January should show in the SP system. This would be a very minimal fee fix.
Where are you?
Where are you?
stcroixscuba
Contributor
That would be an easy warranty replacement. Even if you were buying the spring outright it would be a buck and a half. We're a Scubapro dealer and I'll replace it for free for you. If course on the one hand you'd need to come to St. Croix to get it done but on the other hand we could also set you up with some world class scuba diving while you were here.
Similar threads
