The Natural
Contributor
Cord snapped off my pull dump on my Rec Wings last week while diving. Can I fix this myself or should I call Dive Rite and order a replacement?
Dive Rite Pull Dump replace
- Thread starter The Natural
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Captain CaveMan
Contributor
theres a dir topic on this.
http://www.scubaboard.com/showthread.php?t=108872&highlight=pull+dump+dir
the topic about changing the string to a non-pull bulb. its just a string with some little knots on it to pull on so the bulb wont get cought.
http://www.scubaboard.com/showthread.php?t=108872&highlight=pull+dump+dir
the topic about changing the string to a non-pull bulb. its just a string with some little knots on it to pull on so the bulb wont get cought.
Sideband
Guest
Either way, the fix is easy. The string runs through the ball, the dump cover, spring then the dump seal. Unscrew the assembly then, carefully pry the rubber face off this last piece and thread through a new piece of cave line. Tie a new knot then use a dab of Aqua-Seal to hold the rubber pad back down. Thread the line through the remaining pieces, including or excluding the little ball on the end, an screw it back together.
Joe
Joe
abitton
Contributor
Happened to me as well...
Check this out. It worked fine and was very easy to do:
http://www.scubaboard.com/showthread.php?t=101724
Good luck!
Alex
Check this out. It worked fine and was very easy to do:
http://www.scubaboard.com/showthread.php?t=101724
Good luck!
Alex
Similar threads
- Question
