DennyB,
Good observation.
Maybe check out the NAUI Rec and Tec Tables -- as published, tested, released and used in the field for TRAINING of divers (first, and foremost). The Rec Tables for air, EAN32, and EAN36 are trivial to use, and have simple "backup" rules, and range sea level to 10,000 ft elevation. The Tec (deco) Tables are for trimix, nitrox, helitrox, etc. with switch to pure O2 at 20 fsw. Other Agency folks are reported to also be users.
Tables, based on RGBM, are correlated with data
from RGBM Data Bank using standard probabilistic deco
risk analysis (described TDID, RGBM In Depth, etc). Don't
know exact count, maybe a bunch of 10,000s of dives by
now without mishap just on these Tables.
BW
Good observation.
Maybe check out the NAUI Rec and Tec Tables -- as published, tested, released and used in the field for TRAINING of divers (first, and foremost). The Rec Tables for air, EAN32, and EAN36 are trivial to use, and have simple "backup" rules, and range sea level to 10,000 ft elevation. The Tec (deco) Tables are for trimix, nitrox, helitrox, etc. with switch to pure O2 at 20 fsw. Other Agency folks are reported to also be users.
Tables, based on RGBM, are correlated with data
from RGBM Data Bank using standard probabilistic deco
risk analysis (described TDID, RGBM In Depth, etc). Don't
know exact count, maybe a bunch of 10,000s of dives by
now without mishap just on these Tables.
BW
cdennyb:Now that it seems everyone who's contributing to this thread has entered their two cents worth (and much of it was worth far more than that in my opinion!) I have one last question on the subject:
We all seem to agree, to one degree or another, that the NAVY tables are wrong. The PADI Tables are pretty wrong, and that would go for most every deco plastic card table out their in someones dive box printed before say, oh 1990 or thereabouts.
What would it take to get the industry in general to re-write the dive cards and 'wheels' to reflect the deco profiles that are produced with say...V-Planner or GAP software, etc.?
Take any PADI or other deco card and run a software program like those discussed in this thread and you'll see the complete difference in the profiles. Since most divers entering into the sport are interested in obtaining the latest regulator, the fastest scooter, the best tank, the cutiest mask, etc. it would also seem to me they'd want to be taught with the latest technologically advanced deco profiles, Hummmm?
Any comments from our illustrious leaders in the area of physics and decompression science about how we can demand the instructors and oganizations step up and adopt the latest and most accurate for our up and coming new divers?
thanks in advance...
db![]()