I recently bought three Dacor regs at an estate sale. One is a Olympic 400 and the others are a Pacer and a Pacer XL. All have bad diaphragms. Can anyone tell me of a replacement diaphragm for any of these regs? I also posted this on the basic forum so there might end up being two identical posts.
Dacor diaphragms needed
- Thread starter Garrobo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
captain
Contributor
try the sea hunt forum
AB219
New
Garrobo:
I have a Dacor Pacer XL with a enviromental kit. I have had the regulator since 1983, great regulator.... But, since MARES had taken over Dacor parts for my Dacor were getting hard to find. I think you might have less aggravations rebuilding something a little newer. I went with a Mares Proton Ice with the enviromental kit two years ago.
On the Dacor regs the environemntal kit normally consisted of a new cap for the ambient pressure chamber that accommodated an additional diaphragm to retain silicone oil. The oil itself was pretty famous for expanding when the reg was out in the sun and leaking some oil was pretty common - much the same problem as environmental silicone in environmentally protected piston first stages.
DiveSite
Contributor
Garrobo:
1st or 2nd stage diaphrams?
Similar threads
