Converting my AL Legend from yoke to DIN

[Dan Watkins]

Just curious why you would want to go back and forth between DIN and Yoke. Why not just keep the DIN on and use a Yoke screw on adapter if you need to use Yoke?

 

[Dive-aholic]

Just curious why you would want to go back and forth between DIN and Yoke. Why not just keep the DIN on and use a Yoke screw on adapter if you need to use Yoke?

Personally, I have dedicated regs for each set up I have. But for those that don't, the reason may be that using a yoke screw may cause the 1st stage to stick out a little too much. It does add another inch or so. And this may be a little uncomfortable. I've used the yoke screws on ponies, but never my back gas.

 

[mike_s]

Just curious why you would want to go back and forth between DIN and Yoke. Why not just keep the DIN on and use a Yoke screw on adapter if you need to use Yoke?

THis is what I do on the ocassion that I use yoke now. The screw on yoke adapater is $30 to $40 bucks and is easy to change back and forth.