justcallmecam
Registered
- Messages
- 42
- Reaction score
- 4
- Location
- Siquijor island, Philippines
- # of dives
- I just don't log dives
I have 2 of the above units and want to convert one for 300bar use.
My question is besides the final safety valve is there anything else that needs to be changed?
the pumping unit / block is also used on 340LPM (MCH-18 tropical plus commander 340L) machines, and 320LPM (MCH-19 Commander).
I am assuming my 290LPM unit is the same machine running at a lower RPM for cooling purposes, to pump 300 bar will I need to change the drive pulley so the unit is doing the same RPM as the 300bar machines i.e. MCH19 Commander?
if so what would be the recommended RPM?
Thanks
Cam.
My question is besides the final safety valve is there anything else that needs to be changed?
the pumping unit / block is also used on 340LPM (MCH-18 tropical plus commander 340L) machines, and 320LPM (MCH-19 Commander).
I am assuming my 290LPM unit is the same machine running at a lower RPM for cooling purposes, to pump 300 bar will I need to change the drive pulley so the unit is doing the same RPM as the 300bar machines i.e. MCH19 Commander?
if so what would be the recommended RPM?
Thanks
Cam.