Broken inflator attachment

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

bananas75

Registered
Messages
51
Reaction score
7
Location
The South Pacific
# of dives
I just don't log dives
Hi all
I jave an older bcd that i would like to resurect, unfortunalty when pulling it out of a locker there was a cracking sound. On investigating the threaded attachment point at the shoulder of the bcd for the inflator assembly has cracked up and without too much encouragement fallen to pieces.

Is it possible to get a new piece fitted/glued in or are they integral to the bladder and non replaceable?
 
Hi all
I jave an older bcd that i would like to resurect, unfortunalty when pulling it out of a locker there was a cracking sound. On investigating the threaded attachment point at the shoulder of the bcd for the inflator assembly has cracked up and without too much encouragement fallen to pieces.

Is it possible to get a new piece fitted/glued in or are they integral to the bladder and non replaceable?
NO or YES.
There are plenty of old posts on the topic.
Good luck.
 
Make and model and a picture of the damaged area would go a long way to help us help you.
 

Dead easy for DR wing but........
 
Sorry for the delayed response, been out sailing.

So its a Northern Divers guardian bcd (a small uk brand)

Photo hopefully attached.
 

Attachments

  • 20220909_140746.jpg
    20220909_140746.jpg
    76.4 KB · Views: 54
If that’s what I think it is, it’s trashed. Toss it.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom