Are all BCDs can be used with Nitrox?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

MikeM_scuba

Contributor
Messages
86
Reaction score
1
Location
Philly
# of dives
100 - 199
I have IDI Advantage BC, don't know if I can use it with Nitrox.
I know that not all regulators work with Nitrox - for working with Nitrox regulator must have different greese, filters, something else.
Please help.
 
aquaoren:
Yes, all BC's can be used with nitrox. :D
Are you sure?...Are the BC's O2 cleaned? I wouldn't want to blow up or something.
 
Basically, all scuba equipment can be used with mixes of 40% or less. In fact, tanks don't even need to necessarily be O2 cleaned if it's premix. The O2 cleaning is necessary for partial pressure blending, when you're putting 100% O2 into a tank and then adding grade E air. Plus, by the time it gets past the 1st stage, the pressure is reduced enough to not be a problem.
 
MikeM_scuba:
I have IDI Advantage BC, don't know if I can use it with Nitrox.
I know that not all regulators work with Nitrox - for working with Nitrox regulator must have different greese, filters, something else.
Please help.


:14: hmmmmmmmmmmmmmm...........

Never thought about it. Interesting point.

Have just signed up for Enrich Air course myself............................. :D
 
Here at Anon Technical Services we offer O2 cleaning services for:

Any BCs
Masks and snorkels (Free with any BC service!)
Dive Lights
Wetsuits
AND regulators to 39% O2!!!

Operators are standing by.
 
MikeM_scuba:
I have IDI Advantage BC, don't know if I can use it with Nitrox.
I know that not all regulators work with Nitrox - for working with Nitrox regulator must have different greese, filters, something else.
Please help.

Are you nitrox certified yet? Was this covered?

If you are not yet nitrox certified but thinking ahead then it was a good question. While you may have found the aswer searching I don't recall this as being a frequent question at all. First time I hear it in a year of following the board.

Dive-aholic gave a good answer, I think.

Pete
 
BigJetDriver69:
JeffG:
Are you sure?...Are the BC's O2 cleaned? I wouldn't want to blow up or something.
Now, now, Jeffie! Musn't tease the newbies!

Sad thing is, I could see an LDS doing this to an unknowing diver.
 

Back
Top Bottom