What the hell is it?

[The Chairman]

It says 25m on the shoulder, so is this a 25l tank??? It's from Germany and belonged to a recently deceased ScubaBoarder. It looks suspiciously like an LP85. It's stuck in the back with lots of scrubber, so it will be tomorrow before I can get better pictures of the neck. BTW, if you need Scrubber, he has a lot and it's going for cheap. I'll be posting about it and helping him liquidate a lot of his scuba gear.

 

[Wookie]

European threads are 25MM rather than 3/4" straight thread.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjTlbyI1sr9AhVvF1kFHUXqBiYQFnoECBEQAQ&url=https%3A%2F%2Fwww.divegearexpress.com%2Famfile%2Ffile%2Fdownload%2Ffile%2F166%2Fproduct%2F6641%2F&usg=AOvVaw0Wl6X80yom9w5WLH1VHs5G

Metric threads are used internationally, and standardised in Europe for diving cylinders, with the preferred
threads being M25 x 2.0 for typical diving cylinders and M18 x 1.5 for smaller cylinders, e.g. those used in
buoyancy devices (EN 250 [Ref. 3] and EN 15333 [Ref. 4]), the thread detail being identified in EN 144-1
[Ref. 5] and ISO 15245 [Ref. 6].

 

[The Chairman]

European threads are 25MM rather than 3/4" straight thread.

25-2 as evidenced by the manifold. So, keep looking!

 

[Raphus]

Looks like a standard d12 (12l)

Threads are m25 usually

 

[Raphus]

Scrubber is new? I am from Germany and very interested

 

[Wookie]

25-2 as evidenced by the manifold. So, keep looking!

Yes. M25 x 2.0 metric.

I have some doubles from Europe.'

Heavy as hell.

 

[azstinger11]

It says 25m on the shoulder, so is this a 25l tank??? It's from Germany and belonged to a recently deceased ScubaBoarder. It looks suspiciously like an LP85. It's stuck in the back with lots of scrubber, so it will be tomorrow before I can get better pictures of the neck. BTW, if you need Scrubber, he has a lot and it's going for cheap. I'll be posting about it and helping him liquidate a lot of his scuba gear.

View attachment 773243​

Which marketplace forum will you posting the scrubber in? I'm interested and I think of others that would be, shipping dependent.

 

[rhwestfall]

Yep, metric thread tanks...

 

[The Chairman]

Yes. M25 x 2.0 metric.

I have some doubles from Europe.'

Heavy as hell.

Indeed it is. You can get m25-1, m25-1.5 and m25-2. According to the manifold, these are the finer threads. I'm trying to figure tank capacity.

Which marketplace forum will you posting the scrubber in? I'm interested and I think of others that would be, shipping dependent.

PM me. I am not going to take any money for this. All proceeds will go to Mike's son, save shipping costs. I'll start a thread in rebreathers and post a link here.

 

[rhwestfall]

The truth resides under that tape....