...at the end of the hose by the inflator or the whole tube/Air2 at the wing?
Leave the original corrugated hose on, remove the inflation mechanism and replace it with the AIR II (AIR II attached to the original corrugated hose).
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
...at the end of the hose by the inflator or the whole tube/Air2 at the wing?
Thnk you so much for the clarification!Leave the original corrugated hose on, remove the inflation mechanism and replace it with the AIR II (AIR II attached to the original corrugated hose).
S-Tek Pure harness with OMS wings. The handle is so useful. Harness are comfortable but would prefer them a bit stiffer.
Sure! I'll set it up and can perhaps post the pictures tom. I also prefer the S tek STA over conventional STA. Cylinder sit closer to the plate and u have the option to use either 1 or 2 cam bands. Placement of the bands also allows more flexible range of cylinder position allowing a cylinder to be placed lower even when using 2 cam bands.Can you please show the back of the BC with the STA?
Sure! I'll set it up and can perhaps post the pictures tom. I also prefer the S tek STA over conventional STA. Cylinder sit closer to the plate and u have the option to use either 1 or 2 cam bands. Placement of the bands also allows more flexible range of cylinder position allowing a cylinder to be placed lower even when using 2 cam bands.